MSDS

March 17, 1996                              
Revision Jan. 11,2001                    
FLAMMABLE      

Section 1 Product Information

Product Name
 
“Royal Shine” Vinyl Dressing

0 = Least 1 = Slight 2 = Moderate  3 = High  4 = Severe

Hazard Rating Health  1
  Fire  3 
  Reactivity  1

 

Manufacturer's Name

Hunter’s Sales, Inc.

Company Address
418 South Railroad Ave / P.O. Box 369
Twin City, GA. 30471

Company Phone
(478) 763-2564
Company Fax
(478) 763-3796
Emergency Phone
(888) 349-2436

Section 2 Physical Data Appearance

Appearance . . . . . . . . . . . . . . . . . . . . . Blue Liquid
Specific Gravity . . . . . . . . . . . . . . . . . . .Not established-same as water
Solubility in Water . . . . . . . . . . . . . . . . complete
Vapor Press mm hg a 20 Cel . . . . . . . . not established
Boiling/Melting Point . . . . . . . . . . . . . .
Vapor density . . . . . . . . . . . . . . . . . . . not established
Evaporation rate . . . . . . . . . . . . . . . . . slower than n-butyle  acetate
Percent volatile by weight (%) . . . . . . . less than .05%
 

Hazardous Ingredients Exposure Limits

NONE

CAS#                     Ingredient                              TLV                                     OSHA-PEL
110-54-3                  Hexane                               55.0                                                             
      Hexane This product is hazardous as defined in 29 CFR 1910.1200 FLAMMABLE OS  IPEL:ACGIH TLV

 

Section 3 Health Hazard Data

Routes of Exposure: Exposure may be by INHALATION and/or SKIN or EYE contact, depending on conditions of use. To minimize exposure, follow recommendations for proper use, ventilation and personal protective equipment.
ACUTE HEALTH HAZARDS
Inhalation:  High vapor may be irritant to the eyes and respiratory tract
Skin Contact: May cause skin irritation
Swallowing: Aspirationhazard This material can enter lungs while swallowing may cause mild to severe pulmonary injury. Expected to have a low to moderate toxicity by absorption through digestion system.
Eye Contact: Causes irritation
Sign and symptoms; Effects of overexposure may include and skin irritation, irritation of The nose and throat, central nervous system effects include
dizziness, headache, drowsiness, and loss of coordination, fatigue.

 

CARCINOGENCITY: No definitive information available on carcinogenicity, target organs or chronic toxicity

Section 4 Emergency First Aid INHALATION

INHALATION No adverse effects from breathing  vapors.
SKIN CONTACT Remove contaminated clothing and wash with soap and water.
INGESTION Drink DONOT INDUCE VOMITING. Aspiration hazard. Do not give anything by mouth. If victim is drowsy or unconscious, place on left side with head down...
EYE CONTACT Flush with water for 10 - 15 minutes,  including under the eyelids. Seek medical attention. .

Section 5 Fire Fighting Measures

Flash Point                                 <0 deg F extremely flammable
Flammability limits in air
        
Not Determined
Extinguishing Media
               water spray to disperse vapors. Extinguish with foam or dry
chemical
Special Fire Fighting

Full protective equipment including sell-contained Breathing apparatus should be worn. Unusual Fire and Explosion Hazards Keep containers closed. Isolate from heat
Electrical equipment, and open flames. Closed containers may explode upon exposure to extreme heat. Vapors may travel considerable distances to a source of ignition where they can ignite.

Section 6 Soils or Leak Procedures

Clean-up personnel must wear protective clothing and equipment. Contain spillage or leakage in suitable container or contain in a holding area. A temporary holding area may be formed with an earthen dike system. Do not allow drainage to reach sewers, streams or storm conduits. Recover with vacuum equipment such as a septic tank truck or neutralize with weak acid solutions and flush with water. Avoid splashing or misting which could increase health hazards.
Section 7 & 8 Precautions for Safe Handling & Use/Personal Protection
Respiratory Protection . . . . . . . none normally required w/adequate  ventilation
Ventilation . . . . . . . . . . . . . . . . local exhaust is recommended,  general mechanical ventilation is adequate
Protective Clothing . . . . . . . . . . Gloves, coveralls, aprons, boots, as needed to prevent Skin contact.
Eye Protection . . . . . . . . . . . . . safety glasses or goggles should be  worn in all industrial operations

Handling Instructions: Handle as flammable or combustible liquid as appropriate. Avoid eye contact and prolonged contact with the skin.
 Use adequate ventilation. Wash thoroughly after handling.

Section 9 Physical & Chemical Properties
(See Section 2, page 1)
Section 10 Reactivity Data
Product Stability                             stable
 Chemical Incompatibility              
This product is flammable avoid contact with all oxidizing agents
 Hazardous Decomposition          

 Hazardous Polymerization           
Section 11    Toxicology Information
This is a strong Petroleum based product See Section 4 for specific first aid measure
Section 12 Ecoloalcal information
Do not dispose in our lakes, streams, or ponds. As with any degreasing application, care should be taken to properly dispose of petroleum wastes and sludge removed from equipment that has been cleaned with this product TNs product is biodegradable under normal atmospheric conditions
Section 13 Disposal  Considerations
Comply with all applicable governmental regulation on spill reporting and handling or disposal wastes.
Section 14 Transport  Information
This product is a class 3 ORM-D non-regulated material but subject to all applicable DOTS regulations. UN 1268 Flammable liquid.
Section 15 Regulator Information
TThis product contains Hexane that is listed on TSCA inventory as UVCB (Unknown, Variable, composition or
biological) chemical at CAS registry #64742-49-0
CAS# Chemical Name Percent By weight
NONE
 

Section 16 Other Information

This information is drawn from recognized sources believed to be reliable. Hunter’s Sales, Inc. makes no guarantees or assumes any liability in connection with this information. The user should be aware of changing technology, research, regulation and analytical procedures that may require changes herein. The data in this MSDS is supplied upon the condition that persons will evaluate this information and then determine its suitability for their use. Complies with Ansi 2400-1. Only USA regulations apply to the above.