Feb. 3, 1994
 Revision August 24, 2000

Section 1 Product Information

Product Name
 “ Any Wheel Cleaner”

Hazard Rating                            Health 0                 0=Least
                                                      Fire 0                    1=Slight
                                                      Reactivity 0          2= Moderate
                                                                                    3= High

Manufacturer's Name

Hunter’s Sales, Inc.

Company Address

418 South Railroad Ave / P.O. Box 369
Twin City, GA. 30471

Company Phone

(478) 763-2564

Company Fax

(478) 763-3796

Emergency Phone

(888) 349-2436

Section 2 Physical Data Appearance

Appearance light green
Specific Gravity 05-1.0
Solubility in Water complete
Vapor Press mm hg a 20 Ccl not established
Evaporation Rate slower than n-butyle acetate
Percent volatile by weight (%)....<.05

                                       Hazardous Ingredients Exposure Limits

CAS#                     Ingredient              TLV                                     OSHA-PEL
111-76-2              Ethanol, 2-butoxy       25-PPM                              50-PPM


Section 3 Health Hazard Data Routes of Exposure:

Routes of Exposure: Exposure may be by INHALATION and/or SKIN Or EYE contact, depending on conditions of use
 To minimize exposure, follow recommendations for proper use- ventilation and personal protective equipment.
 Inhalation: High concentrations are slightly irritating to the eyes And respiratory tract. May cause headache, dizziness,
 Nausea, vomiting and malaise.
 Skin Contact: Prolonged and widespread contact, as with
 Chemical saturated clothing can cause reddening,
 Swelling and damage to the skin. The use of chemical
 Resistant gloves are recommended. Glove types are:
 Rubber, latex, plastic. Do not use leather or wool
 Gloves. Penetrates skin readily. Frequent or
 Widespread contact may result in the absorption
 Of potentially harmful amounts. Signs and symptoms
 Of toxicity are similar to those of swallowing
 Swallowing moderately toxic. May cause headache, dizziness,
 Incoordination, nausea, vomiting, diarrhea and
 Weakness. Ingestion may cause red blood cell
 1-lemolysis and possible liver and kidney injury.
 Eye contact Causes irritation and possible corneal injury.
 CARCINOGENICITY: The components in this product are not considered
 To be a carcinogen by the National Toxicology Program, the International
 Agency for Research on Cancer or the Occupation Safety and Health

Section 4 Emergency First Aid INHALATION

INHALATION Remove victim to fresh air. If not breathing give artificial respiration. Get medical attention if necessary.
SKIN CONTACT Remove contaminated clothing and wash with water. (*note, a simple water rinse is not adequate to remove this product from the skin. Continue to rinse with water until slipperiness is gone.) If irritation occurs, get medical attention
INGESTION Do not induce vomiting. If vomiting occurs spontaneously, keep head below hips to prevent aspiration. Drink plenty of water or fruit juice. Get immediate medical attention.
EYE CONTACT Flush with water for 10-15 minutes while holding eyelids open Seek medical attention.


Section 5 Fire Fighting Measures

Flash Point                                 not established
Flammability limits in air
not established
Extinguishing Media
               water spray, carbon dioxide, dry chemical, Alcohol-type or universal- type foams Applied by manufacture’s recommended Techniques.
Special Fire Fighting
Full protective equipment including self- Contained breathing apparatus should be Worn.Unusual Fire and Explosion Hazards... Keep containers closed. Isolated from Heat or electrical equipment, and open flames.
Closed containers may explode upon exposure to extreme heat. During emergency conditions overexposure to decomposition products may cause a health hazard. Symptoms may not be immediately apparent.

Section 6 Soils or Leak Procedures

Clean-up personnel must wear protective clothing and equipment. Contain spillage or leakage in suitable container in a holding area. A temporary Holding area may be formed with an earthen dike system. Do not allow drainage
 To reach sewers, streams or storm conduits. Recover with vacuum equipment such as a septic tank truck or neutralize with weak acid solutions and flush with water. Avoid splashing or misting which could increase health hazards.
Section 7 & 8 Precautions for Safe Handling & Use/Personal Protection
Respiratory Protection None normally required with adequate ventilation.
 Ventilation Local exhaust is recommend, general mechanical Ventilation is adequate.
 Protective Clothing Gloves, coveralls, aprons, boots, as needed to prevent Skin contact.
 Eye Protection Safety glasses or goggles should be worn in all industrial Operations.
 Handling Instructions Use normal chemical handling procedures for Non-hazardous products
Section 9 Physical & Chemical Properties
(See Section 2, page 1)
Section 10 Reactivity Data
Product Stability                             stable
 Chemical Incompatibility               acids
 Hazardous Decomposition           will not occur
 Hazardous Polymerization            will not occur
Section 11    Toxlcoloav Information
NO SPECIAL toxicological measures required. See section 4 for specific first aid measures.
Section 12 Ecoloalcal information
This product does not have any unusual ecological concerns.
Section 13 Disposal  Considerations
Comply with all applicable governmental  regulations on spill reporting and handling of disposal wastes.
Section 14 Transport  Information
This product is considered a class 4 ORM-D non-regulated material and subject To all applicable DOT regulations.
Section 15 Regulator Information
This product contains the following toxic chemicals subject to the reporting Requirements of Section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 (40 CFR 372)
CAS#                            Chemical Name                                      Percent by Weight
This information should be included in all MSDS that are copied and
Distributed for this material.

Section 16 Other Information

This information is drawn from recognized sources believed to be reliable. Hunter’s Sales, Inc. makes no guarantees or assumes any liability in connection with this information. The user should be aware of changing technology, research, regulation and analytical procedures that may require changes herein. The data in this MSDS is supplied upon the condition that persons will evaluate this information and then determine its suitability for their use. Complies with Ansi 2400-1. Only USA regulations apply to the above.