MSDS

March 1, 2000
Revision Sept. 1, 2000

Section 1 Product Information

Product Name
Air Fresheners
0= Least 1= Slight 2= Moderate 3= High 4= Severe
Hazard Rating Health 2     
Fire 1 
Reactivity 1
Manufacturer's Name  Hunterís Sales, Inc.
Company Address

418 South Railroad Ave / P.O. Box 369
Twin City, GA. 30471

Company Phone

(478) 763-2564

Company Fax

(478) 763-3796

Emergency Phone

(888) 349-2436

Section 2 Physical Data Appearance

Appearance... Liquid
Specific Gravity.... . not determined
Solubility in Water... soluble
Vapor Press mm hg a 20 Gel not determined
Boiling ó Melting point not determined
Vapor Density heavier than air
Evaporation Rate slower than n-butyl acetate
Percent volatile by weight (%)... not determined

Section 3 Fire, Explosion, & Reactivity Hazard Data

Flash Point Not Determined
Flammability limits in air (%V) Not Determined
Extinguishing Media Carbon Dioxide, Foam or Dry Chemical
Special Fire Fighting Procedures Class B fire procedures, wear OSHA approved
Respirator and protective gear
Unusual Fire & Explosion Hazards None Known
Product Stability Stable
Chemical Incompatibility Strong Oxidizing Agents
Hazardous Decomposition Products Carbon Dioxide or Carbon Monoxide and smoke
On combustion
Hazardous Polymerization Will not occur

Section 4 Emergency First Aid INHALATION

The specific components of this product. constitute a trade secret. Listed below
in tests with laboratory animals to have hazardous properties other than (1)
or (2) eye and skin irritation from excessive contact.

Both of these hazards are addressed elsewhere on this data sheet The relevancy of animal test data on these components to the mixture as a whole or to a human has riot been established.
Please note that these possible effects in lest animals were reported for continual overexposure to components of this mixture. Many of the substances having such effects are natural components of common foods and are not known to be harmful in normal use.
 

Section 5 Hazardous Ingredients Exposure Limits

Chemical name (s) Cps# Tt.V PEL

Isopropanal 67-63-O400PPM 400PPM

Nonylphenoxpotyelhoxy. MhariOl 6B.4 rile ri/a

Section 6 Effects pf Overexposure

Primary routes of exposure Eyes Skin or Inhalation
EYES: Can cause Irritation, Blurred Vision
SKIN: Prolonged or repeated contact can cause irritation. detailing,
Or dryness of the skin, dermatitis.
INHALATION: Excessive inhalation of vapors can cause irritation of the
Respiratory tract, nausea dizziness or headache
SWALLOWING: Can cause serious health effects including nausea, vomiting.
Gastrointestinal upset.
Medical conditions aggravated by exposure None Known
FIRST AID
EYES. Flush with water for at least 15 minutes. get rnedicai
Attention if necessary.
SKIN Wash thoroughly with soap and water, remove contaminated
Clothing.
INGESTION Give water to dilute, gel medical attention.
INHALATION. If affected by vapors, get fresh air. lf breathing is difficult
See physician. Aspiration of substantial amounts of
Irritant liquid into lungs could be fatal- Get Medical Help
Section 7 Precautions for Safe Handling
Respiratory Protection None normally required with adequate ventilation
Ventilation Local exhaust is re general mechanical
Ventilation is adequate
Protective Clothing Gloves coveralls as needed to prevent skin contact
Eye Protection Safety glasses or goggles should be worn in alt
Industrial operations
Handling Instructions Handle as flammable or combustible liquid as appropriate
Avoid eye contact and piíolonged contact with the skin
Use adequate ventilation. Wash thoroughly after handling
Section 8 Other Information
This Information is drawn from recognized sources believed to be reliable. EM Inc. makes no guarantees or assumes any liability In connection with this information. The user should be aware of changing technology, research, regulation and analytical procedures that may require changes herein. The data in this MSDS is supplied upon the condition that persons will evaluate this information and then determine its suitability for their use. Only USA regulations apply to the above. Complies with AnsI 2400.1

Section 19 Other Information

This information is drawn from recognized sources believed to be reliable. Hunterís Sales, Inc. makes no guarantees or assumes any liability in connection with this information. The user should be aware of changing technology, research, regulation and analytical procedures that may require changes herein. The data in this MSDS is supplied upon the condition that persons will evaluate this information and then determine its suitability for their use. Complies with Ansi 2400-1. Only USA regulations apply to the above.